D-Link DWL-2600AP User Manual

Monitoring Status and Statistics
D-Link Unified Wired and Wireless Access System
Oct. 2015 Page 504
D-Link UWS User Manual
Table 296 describes the information available on the Distributed Tunneling page for the associated client
status.
Command Buttons
The page includes the following button:
• Refresh—Updates the page with the latest information.
Table 296: Associated Client Distributed Tunneling Status
Field Description
Distributed Tunneling Status Indicates whether this client is associated with a network that supports L2
distributed tunneling.
Client Roam Status Indicates whether the client is on the Home AP or has roamed to another AP
and is using a tunnel. The field can display one of the following values:
• Home—Client is not using a tunnel.
• Roaming—Client is using a tunnel.
If distributed tunneling is disabled, the field displays the roam status as
Roaming.
Home AP MAC Address Shows the MAC Address of the Home AP for the client. The value is meaningful
only for clients that are associated with networks enabled for distributed
tunneling.
Associated AP MAC Address Shows the MAC Address of the AP to which the client roamed via the
distributed tunneling protocol.

D-Link DWL-2600AP Specifications

General

Networking standards	IEEE 802.3af
Ethernet LAN data rates	10, 100 Mbit/s
Maximum data transfer rate	300 Mbit/s
Internal	Yes
LED indicators	Power, Stand-by, Status, WAN, WLAN
WAN connection	Ethernet (RJ-45)
Ethernet LAN (RJ-45) ports	1
Security algorithms	WEP, WPA, WPA2
Operating temperature (T-T)	0 - 40 °C
Operating relative humidity (H-H)	10 - 90 %

Weight and Dimensions

Width	160 mm
Height	45 mm
Weight	240 g
Dimensions (WxDxH)	160 x 160 x 45 mm