D-Link DWL-2600AP User Manual

Monitoring Status and Statistics
D-Link Unified Wired and Wireless Access System
Oct. 2015 Page 450
D-Link UWS User Manual
Figure 304: Switch Status/Statistics
Table 258 on page 446 describes the fields on the Wireless Global Status page.
Table 259: Switch Status/Statistics
Field Description
Total Access Points Total number of Managed APs in the database. This value is always equal to the sum
of Managed Access Points, Connection Failed Access Points, and Discovered Access
Points.
Managed Access Points Number of APs in the managed AP database that are authenticated, configured, and
have an active connection with the wireless switch.
Discovered Access
Points
APs that have a connection with the switch, but haven't been completely configured.
This value includes all managed APs with a Discovered or Authenticated status.
Connection Failed
Access Points
Number of APs that were previously authenticated and managed, but currently don't
have connection with the wireless switch.

D-Link DWL-2600AP Specifications

General

Networking standards	IEEE 802.3af
Ethernet LAN data rates	10, 100 Mbit/s
Maximum data transfer rate	300 Mbit/s
Internal	Yes
LED indicators	Power, Stand-by, Status, WAN, WLAN
WAN connection	Ethernet (RJ-45)
Ethernet LAN (RJ-45) ports	1
Security algorithms	WEP, WPA, WPA2
Operating temperature (T-T)	0 - 40 °C
Operating relative humidity (H-H)	10 - 90 %

Weight and Dimensions

Width	160 mm
Height	45 mm
Weight	240 g
Dimensions (WxDxH)	160 x 160 x 45 mm