Captive Portal Configuration
D-Link Unified Wired and Wireless Access System
Oct. 2015 Page 405
D-Link UWS User Manual
Viewing Interface Capability Status
The Interface Capability Status page contains information about interfaces that can have CPs associated with
them. The page also contains status information for various capabilities. Specifically, this page indicates what
services are provided through the CP to clients connected on this interface. The list of services is determined
by the interface capabilities.
Figure 274: Interface Capability Status
The drop-down menu contains all the wired and wireless interfaces available on the switch. Each wireless
interface is identified by its wireless network number and SSID. Physical (wired) interfaces are identified by the
Port Description that includes slot number, port number, and interface type.
Use the drop-down menu to select the interface with the information to display.
Table 235 describes the fields on the Interface Capability Status page.
Table 235: Interface and Capability Status
Parameter Description
Bytes Received Counter Shows whether the interface supports displaying the number of bytes received
from each client.
Bytes Transmitted Counter Shows whether the interface supports displaying the number of bytes
transmitted to each client.
Packets Received Counter Shows whether the interface supports displaying the number of packets
received from each client.
Packets Transmitted Counter Shows whether the interface supports displaying the number of packets
transmitted to each client.
Session Timeout Shows whether the interface supports client session timeout. This attribute is
supported on all interfaces.
Idle Timeout Shows whether the interface supports a timeout when the user does not send
or receive any traffic.
Roaming Support Shows whether the interface supports client roaming. Only wireless interfaces
support client roaming.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
