Monitoring Status and Statistics
D-Link Unified Wired and Wireless Access System
Oct. 2015 Page 514
D-Link UWS User Manual
Command Buttons
The page includes the following button:
• Refresh—Updates the page with the latest information.
Viewing Detailed Associated Client TSPEC Statistics
The statistics on the TSPEC page show information about each client’s active traffic streams. If there are no
associated clients with active traffic streams, the page displays a message indicating that there are no traffic
streams for any associated clients.
Figure 338: Associated Client Session Detail Statistics
Use the menu above the table to select the MAC address of the client with the information to view. Only clients
with an active traffic stream appear in the selection list.
Fragments Received Total fragmented packets received from the client station.
Fragments Transmitted Total fragmented packets transmitted to the client station.
Transmit Retries Number of times transmits to client station succeeded after one or
more retries.
Transmit Retries Failed Number of times transmits to client station failed after one or more
retries.
TS Violate Packets Received Number of packets sent from a client to the AP in excess of its active
traffic stream (TS) uplink bandwidth, or for an access category
requiring admission control to which the client has not been admitted.
TS Violate Packets Transmitted Number of packets sent from the AP to a client in excess of its active
traffic stream downlink bandwidth, or for an access category requiring
admission control to which the client has not been admitted.
Duplicates Received Total duplicate packets received from the client station.
Note: The client TSPEC statistics do not persist across any client disassociation event, including a
client roam. The TSPEC statistics reset any time a client disassociates from an AP.
Table 305: Associated Client Session Detail Statistics (Cont.)
Field Description
To Next Page
Loading...
Need help?
General
Weight and Dimensions
