Configuring SNTP Settings
D-Link Unified Wired and Wireless Access System
Oct. 2015 Page 102
D-Link UWS User Manual
Figure 33: Global Status
Table 28: Global Status Fields
Field Description
Version Specifies the SNTP Version the client supports.
Supported Mode Specifies the SNTP modes the client supports. Multiple modes may be supported by
a client.
Last Update Time Specifies the local date and time (UTC) the SNTP client last updated the system clock.
Last Attempt Time Specifies the local date and time (UTC) of the last SNTP request or receipt of an
unsolicited message.
Last Attempt Status Specifies the status of the last SNTP request or unsolicited message for both unicast
and broadcast modes. If no message has been received from a server, a status of
Other is displayed. These values are appropriate for all operational modes:
• Other: None of the following enumeration values.
• Success: The SNTP operation was successful and the system time was updated.
• Request Timed Out: A directed SNTP request timed out without receiving a
response from the SNTP server.
• Bad Date Encoded: The time provided by the SNTP server is not valid.
• Version Not Supported: The SNTP version supported by the server is not
compatible with the version supported by the client.
• Server Unsynchronized: The SNTP server is not synchronized with its peers. This
is indicated via the 'leap indicator' field on the SNTP message.
• Server Kiss Of Death: The SNTP server indicated that no further queries were to
be sent to this server. This is indicated by a stratum field equal to 0 in a message
received from a server.
Server IP Address Specifies the IP address of the server for the last received valid packet. If no message
has been received from any server, an empty string is shown.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
