D-Link DWL-2600AP User Manual

Configuring Differentiated Services
D-Link Unified Wired and Wireless Access System
Oct. 2015 Page 347
D-Link UWS User Manual
DiffServ Policy Summary
The DiffServ Class Summary page provides an overview of the policies that have been configured on the
switch. To display the page, click LAN > Monitoring > Differentiated Services > Policy Summary in the
navigation menu.
Figure 230: Policy Summary
Policy Type The available policy type is In, which indicates the type is specific to inbound
traffic. Out indicates the type is specific to outbound traffic direction. This field
is only configurable when you create a new policy. After policy creation, this
becomes a non-configurable field displaying the configured policy type.
Available Class List The menu lists all existing DiffServ class names. The list is automatically
updated as a new class is added or removed from the policy. To associate a
DiffServ class with a policy, select the name of the class from the list, and then
click Add Selected Class.
Member Class List The menu lists all DiffServ classes that have been added to the policy. names.
To remove a DiffServ class from a policy, select the name of the class from the
list, and then click Remove Selected Class. This list is automatically updated as
a new class is added or removed from the policy.
Table 206: Policy Configuration Fields (Cont.)
Field Description

D-Link DWL-2600AP Specifications

General

Networking standards	IEEE 802.3af
Ethernet LAN data rates	10, 100 Mbit/s
Maximum data transfer rate	300 Mbit/s
Internal	Yes
LED indicators	Power, Stand-by, Status, WAN, WLAN
WAN connection	Ethernet (RJ-45)
Ethernet LAN (RJ-45) ports	1
Security algorithms	WEP, WPA, WPA2
Operating temperature (T-T)	0 - 40 °C
Operating relative humidity (H-H)	10 - 90 %

Weight and Dimensions

Width	160 mm
Height	45 mm
Weight	240 g
Dimensions (WxDxH)	160 x 160 x 45 mm