D-Link DWL-2600AP User Manual

Configuring IGMP Snooping
D-Link Unified Wired and Wireless Access System
Oct. 2015 Page 220
D-Link UWS User Manual
Multicast Router VLAN Configuration
Use the IGMP Snooping Multicast Router VLAN Configuration page to configure multicast router settings for
VLANs on an interface.
To access the IGMP Snooping Multicast Router VLAN Configuration page, click LAN > L2 Features> IGMP
Snooping > Multicast Router VLAN Configuration in the navigation tree.
Figure 125: Multicast Router VLAN Configuration
• If you enable or disable multicast router configuration for VLANs on an interface, click Submit to apply the
new settings to the switch.
Table 109: Multicast Router VLAN Configuration Fields
Field Description
Slot/Port Select the physical or LAG interface to display.
VLAN ID Enter the VLAN ID to configure as enabled or disabled for multicast routing.
Multicast Router Select Enable or Disable from the drop-down menu to change the multicast
router mode of the VLAN associated with this interface.

D-Link DWL-2600AP Specifications

General

Networking standards	IEEE 802.3af
Ethernet LAN data rates	10, 100 Mbit/s
Maximum data transfer rate	300 Mbit/s
Internal	Yes
LED indicators	Power, Stand-by, Status, WAN, WLAN
WAN connection	Ethernet (RJ-45)
Ethernet LAN (RJ-45) ports	1
Security algorithms	WEP, WPA, WPA2
Operating temperature (T-T)	0 - 40 °C
Operating relative humidity (H-H)	10 - 90 %

Weight and Dimensions

Width	160 mm
Height	45 mm
Weight	240 g
Dimensions (WxDxH)	160 x 160 x 45 mm