Configuring and Searching the Forwarding Database
D-Link Unified Wired and Wireless Access System
Oct. 2015 Page 183
D-Link UWS User Manual
MAC Address Table
Use the MAC Address Table page to display information about entries in the forwarding database.
To access the page, click LAN > Monitoring > MAC Address Table in the navigation tree.
Figure 94: Forwarding Database Search
Table 80: Forwarding Database Search Fields
Field Description
Filter Specify the type of entries to display. When you select a filter from the menu,
the screen refreshes and displays the entries based on the filter you select,
which can be one of the following:
• Learned: If you select Learned, only MAC addresses that have been
learned are displayed.
• All: If you select All, the entire table is displayed.
MAC Address Search This field allows you to search for an individual MAC address in the forwarding
database table.
MAC Address A unicast MAC address for which the switch has forwarding and/or filtering
information. The format is a two byte hexadecimal VLAN ID number followed
by a six byte MAC address with each byte separated by colons. For example:
01:23:45:67:89:AB:CD:EF, where 01:23 is the VLAN ID and 45:67:89:AB:CD:EF
is the MAC address.
Source Slot/Port(s) The port where this address was learned. In other words, this field shows the
port through which the MAC address can be reached.
ifIndex The ifIndex of the MIB interface table entry associated with the source port.
Status The status of this entry. The possible values are:
• Static: The entry was added when a static MAC filter was defined.
• Learned: The entry was learned by observing the source MAC addresses of
incoming traffic, and is currently in use.
• Management: The system MAC address, which is identified with interface
0.1.
• Self: The MAC address of one of the switch's physical interfaces.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
