D-Link DWL-2600AP User Manual

Monitoring Status and Statistics
D-Link Unified Wired and Wireless Access System
Oct. 2015 Page 497
D-Link UWS User Manual
Command Buttons
The page includes the following button:
• Refresh—Updates the page with the latest information.
Associated Client Status/Statistics
You can view a variety of information about the wireless clients that are associated with the APs the switch
manages. To access the associated client information, click WLAN > Monitoring > Client > Associated Client.
Figure 323: Associated Client Status
The following tabs are available on the Associated Client page:
• Status: Shows status information about wireless clients that are associated with APs managed by the
switch and contains the following information:
– Summary: Shows basic information about associated clients.
– Detail: Shows more detailed information about associated clients, such as which VLAN the client is
assigned to and how long the client has been inactive.
– Neighbor APs: Shows the managed APs that are within range of the wireless clients, which can help
you determine the managed AP an associated client might use for roaming.
– Distributed Tunneling: Shows information about the Distributed Tunnel status of the client.
• SSID Status: Shows the SSID and client MAC address of all clients connected to specific networks.
• VAP Status: Shows the clients associated with a specific VAP on a AP
• Statistics: Shows statistics about wireless clients that are associated with APs managed by the switch and
contains the following information:
– Association Summary: Shows the statistics for a wireless client while it is associated with a single AP.
– Session Summary: If a wireless client roams among different managed APs, the switch can track the
statistics for the entire session.
– Association Detail: Shows additional information about packets the associated client transmits and
receives during association with a single managed AP.
– Session Detail: Shows additional information about packets the associated client transmits and
receives during a session, which can include statistics for one or more managed AP associations if the
client has roamed.

D-Link DWL-2600AP Specifications

General

Networking standards	IEEE 802.3af
Ethernet LAN data rates	10, 100 Mbit/s
Maximum data transfer rate	300 Mbit/s
Internal	Yes
LED indicators	Power, Stand-by, Status, WAN, WLAN
WAN connection	Ethernet (RJ-45)
Ethernet LAN (RJ-45) ports	1
Security algorithms	WEP, WPA, WPA2
Operating temperature (T-T)	0 - 40 °C
Operating relative humidity (H-H)	10 - 90 %

Weight and Dimensions

Width	160 mm
Height	45 mm
Weight	240 g
Dimensions (WxDxH)	160 x 160 x 45 mm