Monitoring Status and Statistics
D-Link Unified Wired and Wireless Access System
Oct. 2015 Page 459
D-Link UWS User Manual
Peer Switch Status
The Peer Switch Status page provides information about other Unified Wireless Switches in the network. To
access the peer switch information, click WLAN > Monitoring > Peer Switch.
Peer wireless switches within the same cluster exchange data about themselves, their managed APs, and
clients. The switch maintains a database with this data so you can view information about a peer, such as its
IP address and software version. If the switch loses contact with a peer, all of the data for that peer is deleted.
One switch in a cluster is elected as a Cluster Controller. The Cluster Controller collects status and statistics
from all the other switches in the cluster, including information about the APs peer switches manage and the
clients associated to those APs.
Figure 310: Peer Switch Status
Command Buttons
The page includes the following button:
• Refresh—Updates the page with the latest information.
Table 265: Peer Switch Status
Field Description
Cluster Controller IP
Address
IP address of the switch that controls the cluster.
Peer Switches Displays the number of peer switches in the cluster.
IP Address IP address of the peer wireless switch in the cluster.
Vendor ID Vendor ID of the peer switch software.
Software Version The software version for the given peer switch.
Protocol Version Indicates the protocol version supported by the software on the peer switch.
Discovery Reason The discovery method of the given peer switch, which can be through an L2 Poll or
IP Poll
Managed AP Count Shows the number of APs that the switch currently manages.
Age Time since last communication with the switch in Hours, Minutes, and Seconds.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
