D-Link DWL-2600AP User Manual

AP Scheduler
D-Link Unified Wired and Wireless Access System
Oct. 2015 Page 665
D-Link UWS User Manual
AP Scheduler
AP scheduler allows you to configure a rule with a specific time interval for VAPs or radios to be operational,
thereby automating the enabling or disabling of the VAPs and Radios.
One of the ways you can use this feature is to schedule radios to operate only during the office working hours
in order to achieve security and reduce power consumption. You can also use the AP Scheduler to allow access
to VAPs for wireless clients only during specific times of day.
AP Scheduler Configuration
To access the AP scheduler configuration page, click WLAN> Scheduler in the navigation menu.
Figure 419: AP Scheduler Configuration
Table 385: AP Scheduler Configuration
Field Description
AP Scheduler Configuration
Scheduler Profile To create a new scheduler profile, select Create Profile from the menu
and specify the name in the following field. To delete an existing time
range, select its name and click Delete Profile

D-Link DWL-2600AP Specifications

General

Networking standards	IEEE 802.3af
Ethernet LAN data rates	10, 100 Mbit/s
Maximum data transfer rate	300 Mbit/s
Internal	Yes
LED indicators	Power, Stand-by, Status, WAN, WLAN
WAN connection	Ethernet (RJ-45)
Ethernet LAN (RJ-45) ports	1
Security algorithms	WEP, WPA, WPA2
Operating temperature (T-T)	0 - 40 °C
Operating relative humidity (H-H)	10 - 90 %

Weight and Dimensions

Width	160 mm
Height	45 mm
Weight	240 g
Dimensions (WxDxH)	160 x 160 x 45 mm