AP Scheduler
D-Link Unified Wired and Wireless Access System
Oct. 2015 Page 666
D-Link UWS User Manual
Any two periodic rules time entries belonging to the same profile must not overlap. The time granularity for
the schedules is one minute.
To delete an existing rule in the Rule Entry area, please select the correspond checkbox beside the rule ID and
click Delete button
Profile Name When creating a new scheduler profile, specify the name, which may
include alphabetic, numeric, dash, underscore or space characters
only. The name must start with an alphabetic character and can
contain up to 31 characters.
Rule Entry Configuration
Entry ID Each scheduler profile may have up to 10 periodic rule entries.
Applicable Days Specify the day(s) when the time entry occurs:
• Daily—Has the same start and end time every day
• Weekdays—Has the same start and end time Monday through
Friday
• Weekdays—Has the same start and end time on Saturday and
Sunday
• Days of the Week—Select the day of the week when the entry
starts and stops. You do not need to use the same day of the week
for the start and end time.
Start Day (Periodic Days of Week only) Select the day the scheduler entry starts.
Start Time The time when the radio or VAP will be operationally enabled. The
time is in HH:MM 24-hour format. The range is <00-24>:<00-59>. The
default is 00:00.
End Day (Periodic Days of Week only) Select the day the scheduler entry ends.
End Time(hh:mm) The time when the radio or VAP will be operationally disabled. The
time is in HH:MM 24-hour format. The range is <00-24>:<00-59>. The
default is 00:00.
Table 385: AP Scheduler Configuration
Field Description
To Next Page
Loading...
Need help?
General
Weight and Dimensions
