Managing VLANs
D-Link Unified Wired and Wireless Access System
Oct. 2015 Page 194
D-Link UWS User Manual
IP Subnet-based VLAN Summary
Use the IP Subnet-based VLAN Summary page to view information about IP subnet to VLAN mappings
configured on your system. If no mappings are configured, the screen displays a “No IP Subnet-based VLAN
Configured” message.
To access the IP Subnet-based VLAN Summary page, click LAN > Monitoring > VLAN Summary > IP Subnet-
based VLAN Summary in the navigation tree.
Figure 103: IP Subnet-based VLAN Summary
• Click Refresh to reload the page and display the most current information.
MAC-based VLAN Configuration
If a packet is untagged or priority tagged, the device shall associate it with the VLAN which corresponds to the
source MAC address in its MAC-based VLAN tables. If there is no matching entry in the table, then the packet
is subject to normal VLAN classification rules of the device.
Use the MAC-based VLAN Configuration page to map a MAC entry to the VLAN table. After the source MAC
address and the VLAN ID are specified, the MAC-to-VLAN configurations are shared across all ports of the
switch.
To display the MAC-based VLAN Configuration page, click LAN > L2 Features > VLAN > MAC-based VLAN >
Configuration in the navigation menu.
Table 89: IP Subnet-based VLAN Summary Fields
Field Description
IP Address Shows the packet source IP address.
Subnet Mask Shows packet source IP subnet mask address.
VLAN ID Shows the VLAN to which the IP address is assigned.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
