D-Link DWL-2600AP User Manual

Configuring 802.1X Network Access Control
D-Link Unified Wired and Wireless Access System
July 2012 Page 689
D-Link UWS User Manual
7. Click Submit to apply the changes to the system.
8. Configure the RADIUS accounting server information.
a. Go to the LAN > Security > RADIUS > Accounting Server page.
b. Select Add from Accounting Server Host Address field.
c. Enter 10.10.10.10 in the Accounting Server Host Address field.
d. Click Submit.
e. in the Secret field, enter secret and select the Apply option.
f. Click Submit.
9. To enable the RADIUS accounting mode, go to the LAN > Security > RADIUS > RADIUS Configuration page,
select Enable from the Accounting Mode menu, and then click Submit.
10. Create an authentication list.
a. Go to the LAN > Administration > Authentication List Configuration page.
b. Enter radiusList in the Authentication List Name field.
c. Click Submit.
d. Select RADIUS from the Method 1 menu, and then click Submit.
11. To set radiusList as the default login list for users that are not configured on the system, go to the LAN >
Security > Port Access Control > Login page, select radiusList from the Login field, and click Submit.

D-Link DWL-2600AP Specifications

General

Networking standards	IEEE 802.3af
Ethernet LAN data rates	10, 100 Mbit/s
Maximum data transfer rate	300 Mbit/s
Internal	Yes
LED indicators	Power, Stand-by, Status, WAN, WLAN
WAN connection	Ethernet (RJ-45)
Ethernet LAN (RJ-45) ports	1
Security algorithms	WEP, WPA, WPA2
Operating temperature (T-T)	0 - 40 °C
Operating relative humidity (H-H)	10 - 90 %

Weight and Dimensions

Width	160 mm
Height	45 mm
Weight	240 g
Dimensions (WxDxH)	160 x 160 x 45 mm