D-Link DWL-2600AP User Manual

Card Configuration
D-Link Unified Wired and Wireless Access System
Oct. 2015 Page 70
D-Link UWS User Manual
• If you make any changes to the page, click Submit to apply the changes to the system.
Priority The switch may not be able to supply power to all connected devices. So,
priority is used to determine which ports can supply power. For ports with the
same priority, the lower numbered port will have a higher priority.
Power Limit Defines the maximum power which can be delivered by a port.
Time Range Use this field to impose a time limitation. When you click Configure, you can
select a configured time range or create a new named time range. To
configure the time range values, use the LAN > Administration > Time Ranges
> Time Range Entry Configuration page.
Table 7: PoE Configuration Fields (Cont.)
Field Description

D-Link DWL-2600AP Specifications

General

Networking standards	IEEE 802.3af
Ethernet LAN data rates	10, 100 Mbit/s
Maximum data transfer rate	300 Mbit/s
Internal	Yes
LED indicators	Power, Stand-by, Status, WAN, WLAN
WAN connection	Ethernet (RJ-45)
Ethernet LAN (RJ-45) ports	1
Security algorithms	WEP, WPA, WPA2
Operating temperature (T-T)	0 - 40 °C
Operating relative humidity (H-H)	10 - 90 %

Weight and Dimensions

Width	160 mm
Height	45 mm
Weight	240 g
Dimensions (WxDxH)	160 x 160 x 45 mm