Dell IDRAC6 User Manual

Configuring iDRAC6 Enterprise Using the Web Interface 113
Viewing an Active Directory CA Certificate
On the Active Directory summary page, click Configure Active Directory
and then click Next. The Current Active Directory CA Certificate section is
displayed. See Table 5-26.
Enabling or Disabling Local Configuration Access
NOTE: The default setting for local configuration access is Enabled.
Enabling Local Configuration Access
1 Click System → Remote Access → iDRAC6 → Network/Security → Services .
2 Under Local Configuration , click to Uncheck the Disable iDRAC6 local
USER Configuration Updates
to enable access.
3 Click Apply .
Disabling Local Configuration Access
1 Click System → Remote Access → iDRAC6 → Network/Security → Services .
2 Under Local Configuration , click to select Disable iDRAC6 local USER
Configuration Updates
to disable access.
3 Click Apply .
None No assigned permissions
Table 5-26. Active Directory CA Certificate Information
Field Description
Serial Number Certificate serial number.
Subject Information Certificate attributes entered by the subject.
Issuer Information Certificate attributes returned by the issuer.
Valid From Certificate issue date.
Valid To Certificate expiration date.
Table 5-25. Role Group Permissions (continued)
Property Description

Dell IDRAC6 Specifications

General

Remote Management	Yes
Out-of-band Management	Yes
Remote KVM	Yes
Virtual Console	Yes
Version	6
Interface	Web-based
Features	Remote console, Virtual media
Security	SSL encryption
Protocols Supported	IPMI, SNMP
Authentication	Active Directory
Compatible Hardware	Dell PowerEdge servers (11th generation)
Remote Access	Yes
Alerts and Notifications	Email, SNMP traps
Power Management	Remote power on/off/reset, Power monitoring
Firmware Updates	Remote firmware updates via web interface or command line