Dell IDRAC6 User Manual

442 iDRAC6 Enterprise Property Database Group and Object Definitions
Description
Specifies the destination IPv4 address for the trap receiver on the network.
The trap receiver receives an SNMP trap when an event is triggered on the
managed server.
cfgIpmiPetAlertEnable (Read/Write)
Legal Values
1 (TRUE)
0 (FALSE)
Default
0
Description
Enables or disables a specific trap.
cfgSmartCard
This group specifies properties used to support access to iDRAC6 using a
smart card.
cfgSmartCardLogonEnable (Read/Write)
Legal Values
0 (Disabled)
1 (Enabled)
Default
0
Description
Enables or disables support for access to iDRAC6 using a smart card.

Dell IDRAC6 Specifications

General

Remote Management	Yes
Out-of-band Management	Yes
Remote KVM	Yes
Virtual Console	Yes
Version	6
Interface	Web-based
Features	Remote console, Virtual media
Security	SSL encryption
Protocols Supported	IPMI, SNMP
Authentication	Active Directory
Compatible Hardware	Dell PowerEdge servers (11th generation)
Remote Access	Yes
Alerts and Notifications	Email, SNMP traps
Power Management	Remote power on/off/reset, Power monitoring
Firmware Updates	Remote firmware updates via web interface or command line