Dell IDRAC6 User Manual

340 RACADM Subcommand Overview
• racadm getconfig -f myrac.cfg
Saves all group configuration objects from iDRAC6 to myrac.cfg .
•
racadm getconfig -h
Displays a list of the available configuration groups on iDRAC6.
• racadm getconfig -u root
Displays the configuration properties for the user named root .
•
racadm getconfig -g cfgUserAdmin -i 2 -v
Displays the user group instance at index 2 with extensive information for
the property values.
Synopsis
racadm getconfig -f < filename >
racadm getconfig -g <
groupName > [-i < index >]
racadm getconfig -u <
username >
racadm getconfig -h
racadm getconfig -g <
groupName > -o < objectName >
Supported Interfaces
• Local RACADM
• Remote RACADM
• telnet/ssh RACADM
getssninfo
Table A-5 describes the getssninfo subcommand.
Table A-5. getssninfo Subcommand
Subcommand Definition
getssninfo Retrieves session information for one or more
currently active or pending sessions from the Session
Manager's session table.

Dell IDRAC6 Specifications

General

Remote Management	Yes
Out-of-band Management	Yes
Remote KVM	Yes
Virtual Console	Yes
Version	6
Interface	Web-based
Features	Remote console, Virtual media
Security	SSL encryption
Protocols Supported	IPMI, SNMP
Authentication	Active Directory
Compatible Hardware	Dell PowerEdge servers (11th generation)
Remote Access	Yes
Alerts and Notifications	Email, SNMP traps
Power Management	Remote power on/off/reset, Power monitoring
Firmware Updates	Remote firmware updates via web interface or command line