Dell IDRAC6 User Manual

414 iDRAC6 Enterprise Property Database Group and Object Definitions
Description
Defines the Web server time-out. This property sets the amount of time in
seconds that a connection is allowed to remain idle (there is no user input).
The session is cancelled if the time limit set by this property is reached.
Changes to this setting do not affect the current session; you must log out
and log in again to make the new settings effective.
An expired Web server session logs out the current session.
cfgSsnMgtSshIdleTimeout (Read/Write)
Legal Values
0 (No time-out)
60 – 10800
Default
1800
Description
Defines the secure shell idle time-out. This property sets the amount of time
in seconds that a connection is allowed to remain idle (there is no user input).
The session is cancelled if the time limit set by this property is reached.
Changes to this setting do not affect the current session; you must log out
and log in again to make the new settings effective.
An expired secure shell session displays the following error message only after
you press <Enter>:
Warning: Session no longer valid, may have timed out
After the message appears, the system returns you to the shell that generated
the Secure Shell session.
cfgSsnMgtTelnetTimeout (Read/Write)
Legal Values
0 (No timeout)
60 – 10800

Dell IDRAC6 Specifications

General

Remote Management	Yes
Out-of-band Management	Yes
Remote KVM	Yes
Virtual Console	Yes
Version	6
Interface	Web-based
Features	Remote console, Virtual media
Security	SSL encryption
Protocols Supported	IPMI, SNMP
Authentication	Active Directory
Compatible Hardware	Dell PowerEdge servers (11th generation)
Remote Access	Yes
Alerts and Notifications	Email, SNMP traps
Power Management	Remote power on/off/reset, Power monitoring
Firmware Updates	Remote firmware updates via web interface or command line