Dell IDRAC6 User Manual

RACADM Subcommand Overview 359
sslcsrgen
Table A-24 describes the sslcsrgen subcommand.
Synopsis
racadm sslcsrgen [-g] [-f < filename >]
racadm sslcsrgen -s
Description
The sslcsrgen subcommand can be used to generate a CSR and download the
file to the client’s local file system. The CSR can be used for creating a
custom SSL certificate that can be used for SSL transactions on the RAC.
Options
Table A-25 describes the sslcsrgen subcommand options.
NOTE: If the -f option is not specified, the filename defaults to sslcsr in your current
directory.
If no options are specified, a CSR is generated and downloaded to the local
file system as sslcsr by default. The -g option cannot be used with the -s
option, and the -f option can only be used with the -g option.
Table A-24. sslcsrgen
Subcommand Description
sslcsrgen Generates and downloads an SSL certificate signing
request (CSR) from the RAC.
Table A-25. sslcsrgen Subcommand Options
Option Description
-g Generates a new CSR.
-s Returns the status of a CSR generation process (generation in progress,
active, or none).
-f Specifies the filename of the location, <filename>, where the CSR will
be downloaded.

Dell IDRAC6 Specifications

General

Remote Management	Yes
Out-of-band Management	Yes
Remote KVM	Yes
Virtual Console	Yes
Version	6
Interface	Web-based
Features	Remote console, Virtual media
Security	SSL encryption
Protocols Supported	IPMI, SNMP
Authentication	Active Directory
Compatible Hardware	Dell PowerEdge servers (11th generation)
Remote Access	Yes
Alerts and Notifications	Email, SNMP traps
Power Management	Remote power on/off/reset, Power monitoring
Firmware Updates	Remote firmware updates via web interface or command line