Dell IDRAC6 User Manual

Configuring the vFlash Media Card for Use With iDRAC6 223
Configuring the vFlash Media Card
for Use With iDRAC6
The vFlash media card is a Secure Digital (SD) card that plugs into the
optional iDRAC6 Enterprise card slot at the back corner of the system.
It provides storage space that behaves like a common USB Flash Key device.
Installing a vFlash Media Card
NOTE: Dell-branded vFlash media is required for the vFlash partition.
1 Remove the blade from the chassis.
2 Locate the vFlash media slot at the back corner of the system.
NOTE: You do not need to remove the blade cover to install or remove
the card.

Dell IDRAC6 Specifications

General

Remote Management	Yes
Out-of-band Management	Yes
Remote KVM	Yes
Virtual Console	Yes
Version	6
Interface	Web-based
Features	Remote console, Virtual media
Security	SSL encryption
Protocols Supported	IPMI, SNMP
Authentication	Active Directory
Compatible Hardware	Dell PowerEdge servers (11th generation)
Remote Access	Yes
Alerts and Notifications	Email, SNMP traps
Power Management	Remote power on/off/reset, Power monitoring
Firmware Updates	Remote firmware updates via web interface or command line