Dell IDRAC6 User Manual

390 iDRAC6 Enterprise Property Database Group and Object Definitions
Description
Specifies the IP address for DNS server 1. This property is only valid if
cfgDNSServersFromDHCP is set to 0 (FALSE).
NOTE: cfgDNSServer1 and cfgDNSServer2 may be set to identical values while
swapping addresses.
cfgDNSServer2 (Read/Write)
Legal Values
A string representing a valid IP address. For example: 192.168.0.20.
Default
0.0.0.0
Description
Retrieves the IP address for DNS server 2. This parameter is only valid if
cfgDNSServersFromDHCP is set to 0 (FALSE).
NOTE: cfgDNSServer1 and cfgDNSServer2 may be set to identical values while
swapping addresses.
cfgNicEnable (Read/Write)
Legal Values
1 (TRUE)
0 (FALSE)
Default
0
Description
Enables or disables iDRAC6 network interface controller. If the NIC is
disabled, the remote network interfaces to iDRAC6 will no longer be
accessible, and iDRAC6 will only be available through the local RACADM
interface.

Dell IDRAC6 Specifications

General

Remote Management	Yes
Out-of-band Management	Yes
Remote KVM	Yes
Virtual Console	Yes
Version	6
Interface	Web-based
Features	Remote console, Virtual media
Security	SSL encryption
Protocols Supported	IPMI, SNMP
Authentication	Active Directory
Compatible Hardware	Dell PowerEdge servers (11th generation)
Remote Access	Yes
Alerts and Notifications	Email, SNMP traps
Power Management	Remote power on/off/reset, Power monitoring
Firmware Updates	Remote firmware updates via web interface or command line