Dell IDRAC6 User Manual

374 RACADM Subcommand Overview
Synopsis
racadm coredump
Description
The coredump subcommand displays detailed information related to any
recent critical issues that have occurred with iDRAC6. The coredump
information can be used to diagnose these critical issues.
If available, the coredump information is persistent across
iDRAC6 power
cycles and will remain available until either of the following conditions occur:
• The coredump information is cleared with the coredumpdelete
subcommand.
• Another critical condition occurs on iDRAC6. In this case, the coredump
information will be relative to the last critical error that occurred.
See the coredumpdelete subcommand for more information about clearing
the coredump.
Supported Interfaces
• Local RACADM
• Remote RACADM
• telnet/ssh RACADM
coredumpdelete
NOTE: To use this command, you must have Clear Logs or Execute Debug
Commands permission.
Table A-44 describes the coredumpdelete subcommand.
Table A-43. coredump
Subcommand Definition
coredump Displays the last iDRAC6 core dump.
Table A-44. coredumpdelete
Subcommand Definition

Dell IDRAC6 Specifications

General

Remote Management	Yes
Out-of-band Management	Yes
Remote KVM	Yes
Virtual Console	Yes
Version	6
Interface	Web-based
Features	Remote console, Virtual media
Security	SSL encryption
Protocols Supported	IPMI, SNMP
Authentication	Active Directory
Compatible Hardware	Dell PowerEdge servers (11th generation)
Remote Access	Yes
Alerts and Notifications	Email, SNMP traps
Power Management	Remote power on/off/reset, Power monitoring
Firmware Updates	Remote firmware updates via web interface or command line