Dell IDRAC6 User Manual

iDRAC6 Enterprise Property Database Group and Object Definitions 387
cfgLanNetworking
This group contains parameters to configure iDRAC6 NIC.
One instance of the group is allowed. All objects in this group will require
iDRAC6 NIC to be reset, which may cause a brief loss in connectivity. Objects
that change iDRAC6 NIC IP address settings will close all active user sessions
and require users to reconnect using the updated IP address settings.
NOTE: For any network property changes on iDRAC6 to be successfully executed
through RACADM, you must first enable iDRAC6 NIC.
cfgNicIPv4Enable (Read/Write)
NOTE: cfgNicIPv4Enable (Read/Write) is not available with OpenManage version
6.1 release. Support will be added in OpenManage version 6.2 release.
Legal Values
1 (TRUE)
0 (FALSE)
Default
1
Description
Enables or disables iDRAC6 IPv4 stack.
cfgDNSDomainNameFromDHCP (Read/Write)
Legal Values
1 (TRUE)
0 (FALSE)
Default
0

Dell IDRAC6 Specifications

General

Remote Management	Yes
Out-of-band Management	Yes
Remote KVM	Yes
Virtual Console	Yes
Version	6
Interface	Web-based
Features	Remote console, Virtual media
Security	SSL encryption
Protocols Supported	IPMI, SNMP
Authentication	Active Directory
Compatible Hardware	Dell PowerEdge servers (11th generation)
Remote Access	Yes
Alerts and Notifications	Email, SNMP traps
Power Management	Remote power on/off/reset, Power monitoring
Firmware Updates	Remote firmware updates via web interface or command line