Dell IDRAC6 User Manual

342 RACADM Subcommand Overview
• racadm getssninfo -A
"root" 143.166.174.19 "Telnet" "NONE"
• racadm getssninfo -A -u *
"root" "143.166.174.19" "Telnet" "NONE"
• "bob" "143.166.174.19" "GUI" "NONE"
getsysinfo
Table A-8 describes the racadm getsysinfo subcommand.
Synopsis
racadm getsysinfo [-d] [-s] [-w] [-A] [-4] [-6]
Description
The getsysinfo subcommand displays information related to iDRAC6, the
managed server, and the watchdog configuration.
Supported Interfaces
• Local RACADM
• Remote RACADM
• telnet/ssh RACADM
Input
Table A-9 describes the getsysinfo subcommand options.
Table A-7. getssninfo Subcommand Output Example
User IP Address Type Consoles
root 192.168.0.10 Telnet Virtual KVM
Table A-8. getsysinfo
Command Definition
getsysinfo Displays information related to iDRAC6.

Dell IDRAC6 Specifications

General

Remote Management	Yes
Out-of-band Management	Yes
Remote KVM	Yes
Virtual Console	Yes
Version	6
Interface	Web-based
Features	Remote console, Virtual media
Security	SSL encryption
Protocols Supported	IPMI, SNMP
Authentication	Active Directory
Compatible Hardware	Dell PowerEdge servers (11th generation)
Remote Access	Yes
Alerts and Notifications	Email, SNMP traps
Power Management	Remote power on/off/reset, Power monitoring
Firmware Updates	Remote firmware updates via web interface or command line