Dell IDRAC6 User Manual

244 Using the RACADM Command Line Interface
Supported RACADM Interfaces
Table 15-2 provides an overview of RACADM subcommands and their
corresponding interface support.
sslcsrgen Generates and downloads the SSL CSR.
testemail Forces iDRAC6 to send an e-mail over iDRAC6 NIC.
testtrap Forces iDRAC6 to send an SNMP alert over iDRAC6 NIC.
traceroute Traces the network path of routers that packets take as they
are forwarded from your system to a destination IPv4 address.
traceroute6 Traces the network path of routers that packets take as they
are forwarded from your system to a destination IPv6 address.
version Displays iDRAC6 version information.
vmdisconnect Closes all open iDRAC6 virtual media connections from
remote clients.
vmkey Resets the virtual media key to the default size of 256MB.
Table 15-2. RACADM Subcommand Interface Support
Subcommand Telnet/SSH Local RACADM Remote RACADM
arp
clearasrscreen
clrraclog
clrsel
config
coredump
coredumpdelete
fwupdate
Table 15-1. RACADM Subcommands (continued)
Command Description

Dell IDRAC6 Specifications

General

Remote Management	Yes
Out-of-band Management	Yes
Remote KVM	Yes
Virtual Console	Yes
Version	6
Interface	Web-based
Features	Remote console, Virtual media
Security	SSL encryption
Protocols Supported	IPMI, SNMP
Authentication	Active Directory
Compatible Hardware	Dell PowerEdge servers (11th generation)
Remote Access	Yes
Alerts and Notifications	Email, SNMP traps
Power Management	Remote power on/off/reset, Power monitoring
Firmware Updates	Remote firmware updates via web interface or command line