Dell IDRAC6 User Manual

RACADM Subcommand Overview 379
Synopsis
racadm traceroute < IPv4 address >
racadm traceroute 192.168.0.1
traceroute to 192.168.0.1 (192.168.0.1), 30 hops max,
40 byte packets
1 192.168.0.1 (192.168.0.1) 0.801 ms 0.246 ms 0.253 ms
Description
Traces a route using IPv4 to a destination on the network.
Supported Interfaces
• Remote RACADM
• telnet/ssh RACADM
traceroute6
NOTE: To use this command, you must have Administrator permission.
Table A-51 describes the traceroute6 subcommand.
Synopsis
racadm traceroute6 < IPv6 address >
racadm traceroute fd01::1
traceroute to fd01::1 (fd01::1) from fd01::3, 30 hops
max, 16 byte packets
1 fd01::1 (fd01::1) 14.324 ms 0.26 ms 0.244 ms
Table A-51. traceroute6
Subcommand Definition
traceroute6 Traces the network path of routers that packets take
as they are forwarded from your system to a
destination IPv6 address.

Dell IDRAC6 Specifications

General

Remote Management	Yes
Out-of-band Management	Yes
Remote KVM	Yes
Virtual Console	Yes
Version	6
Interface	Web-based
Features	Remote console, Virtual media
Security	SSL encryption
Protocols Supported	IPMI, SNMP
Authentication	Active Directory
Compatible Hardware	Dell PowerEdge servers (11th generation)
Remote Access	Yes
Alerts and Notifications	Email, SNMP traps
Power Management	Remote power on/off/reset, Power monitoring
Firmware Updates	Remote firmware updates via web interface or command line