Dell IDRAC6 User Manual

350 RACADM Subcommand Overview
IP Address 2 = ::
IP Address 3 = ::
IP Address 4 = ::
IP Address 5 = ::
IP Address 6 = ::
IP Address 7 = ::
IP Address 8 = ::
IP Address 9 = ::
IP Address 10 = ::
IP Address 11 = ::
IP Address 12 = ::
IP Address 13 = ::
IP Address 14 = ::
IP Address 15 = ::
NOTE: IPv6 information is displayed only if iDRAC6 supports IPv6.
Supported Interfaces
• Local RACADM (returns only IPv4 information)
• Remote RACADM
• telnet/ssh RACADM
getsvctag
Table A-13 describes the getsvctag subcommand.
Synopsis
racadm getsvctag
Table A-13. getsvctag
Subcommand Definition
getsvctag Displays a service tag.

Dell IDRAC6 Specifications

General

Remote Management	Yes
Out-of-band Management	Yes
Remote KVM	Yes
Virtual Console	Yes
Version	6
Interface	Web-based
Features	Remote console, Virtual media
Security	SSL encryption
Protocols Supported	IPMI, SNMP
Authentication	Active Directory
Compatible Hardware	Dell PowerEdge servers (11th generation)
Remote Access	Yes
Alerts and Notifications	Email, SNMP traps
Power Management	Remote power on/off/reset, Power monitoring
Firmware Updates	Remote firmware updates via web interface or command line