122 Using iDRAC6 With Microsoft Active Directory
Prerequisites for Enabling Active Directory
Authentication for iDRAC6
To use the Active Directory authentication feature of iDRAC6, you must
have already deployed an Active Directory infrastructure. See the Microsoft
website for information on how to set up an Active Directory infrastructure,
if you don't already have one.
iDRAC6 uses the standard Public Key Infrastructure (PKI) mechanism to
authenticate securely into the Active Directory; therefore, you would also
require an integrated PKI into the Active Directory infrastructure.
See the Microsoft website for more information on the PKI setup.
To correctly authenticate to all the domain controllers, you also need to enable
the Secure Socket Layer (SSL) on all domain controllers that iDRAC6 connects
to. See "Enabling SSL on a Domain Controller" for more specific information.
Supported Active Directory Authentication
Mechanisms
You can use Active Directory to define user access on iDRAC6 through two
methods: you can use the extended schema solution, which Dell has
customized to add Dell-defined Active Directory objects. Or, you can use the
standard schema solution, which uses Active Directory group objects only.
See the sections that follow for more information about these solutions.
When using Active Directory to configure access to iDRAC6, you must
choose either the extended schema or the standard schema solution.
The advantages of using the extended schema solution are:
• All of the access control objects are maintained in Active Directory.
• Maximum flexibility is provided in configuring user access on different
iDRAC6 cards with varying privilege levels.
The advantage of using the standard schema solution is that no schema
extension is required because all of the necessary object classes are provided
by Microsoft’s default configuration of the Active Directory schema.
To Next Page
Loading...
Need help?
General
