Dell IDRAC6 User Manual

178 Viewing the Configuration and Health of the Managed Server
NOTE: Power and Amperage are measured in AC.
CPU
The CPU screen reports the health of each CPU on the managed server. This
health status is a roll-up of a number of individual thermal, power, and
functional tests.
POST
The Post Code screen displays the last system post code (in hexadecimal)
prior to booting the operating system of the managed server.
Misc Health
The Misc Health screen provides access to the following system logs:
• System Event Log — Displays system-critical events that occur on the
managed system.
• Post Code — Displays the last system post code (in hexadecimal) prior to
booting the operating system of the managed server.
• Last Crash Screen — Displays the most recent crash screen and time.
• Boot Capture — Provides playback of the last three boot screens.
NOTE: This information is also available at System→ Logs tab→ System Event Log.

Dell IDRAC6 Specifications

General

Remote Management	Yes
Out-of-band Management	Yes
Remote KVM	Yes
Virtual Console	Yes
Version	6
Interface	Web-based
Features	Remote console, Virtual media
Security	SSL encryption
Protocols Supported	IPMI, SNMP
Authentication	Active Directory
Compatible Hardware	Dell PowerEdge servers (11th generation)
Remote Access	Yes
Alerts and Notifications	Email, SNMP traps
Power Management	Remote power on/off/reset, Power monitoring
Firmware Updates	Remote firmware updates via web interface or command line