Dell IDRAC6 User Manual

Configuring iDRAC6 Enterprise 47
Configuring Networking Using the CMC Web
Interface
NOTE: You must have Chassis Configuration Administrator privilege to set up
iDRAC6 network settings from the CMC.
NOTE: The default CMC user is root and the default password is calvin.
NOTE: The CMC IP address can be found in iDRAC6 Web interface by clicking
System→ Remote Access→ CMC. You can also launch the CMC Web interface from
this screen.
Launching iDRAC6 Web Interface From the CMC
The CMC provides limited management of individual chassis components,
such as servers. For complete management of these individual components, the
CMC provides a launch point for the server’s iDRAC6 Web interface.
To launch iDRAC6 from the Servers screen:
1
Log in to the CMC Web interface.
2 In the system tree, select Servers .
The
Servers Status screen appears.
3 Click the Launch iDRAC6 GUI icon for the server you want to manage.
You can also launch iDRAC6 Web interface for a single server using the
Servers list in the system tree:
1
Log in to the CMC Web interface.
2 Expand Servers in the system tree.
All of the servers (1–16) appear in the expanded
Servers list.
3 Click the server you want to view.
The
Server Status screen for the server you selected displays.
4 Click the Launch iDRAC6 GUI icon.

Dell IDRAC6 Specifications

General

Remote Management	Yes
Out-of-band Management	Yes
Remote KVM	Yes
Virtual Console	Yes
Version	6
Interface	Web-based
Features	Remote console, Virtual media
Security	SSL encryption
Protocols Supported	IPMI, SNMP
Authentication	Active Directory
Compatible Hardware	Dell PowerEdge servers (11th generation)
Remote Access	Yes
Alerts and Notifications	Email, SNMP traps
Power Management	Remote power on/off/reset, Power monitoring
Firmware Updates	Remote firmware updates via web interface or command line