Dell IDRAC6 User Manual

Using iDRAC6 With Microsoft Active Directory 159
If you are using standard schema, and users and role groups are from different
domains, you must configure global catalog address(es). In this case, you can
use only Universal Group.
If you are using standard schema, and all the users and all the role groups are
in the same domain, you are not required to configure global catalog
address(es).
How does standard schema query work?
iDRAC6 connects to the configured domain controller address(es) first. If the
user and role groups reside in that domain, the privileges are saved.
If global controller address(es) is configured, iDRAC6 continues to query the
Global Catalog. If additional privileges are retrieved from the Global Catalog,
these privileges are accumulated.
Miscellaneous
Does iDRAC6 always use LDAP over SSL?
Yes. All the transportation is over secure port 636 and/or 3269.
During test settings, iDRAC6 does a LDAP CONNECT only to help isolate
the problem, but it does not do an LDAP BIND on an insecure connection.
Does iDRAC6 support the NetBIOS name?
Not in this release.

Dell IDRAC6 Specifications

General

Remote Management	Yes
Out-of-band Management	Yes
Remote KVM	Yes
Virtual Console	Yes
Version	6
Interface	Web-based
Features	Remote console, Virtual media
Security	SSL encryption
Protocols Supported	IPMI, SNMP
Authentication	Active Directory
Compatible Hardware	Dell PowerEdge servers (11th generation)
Remote Access	Yes
Alerts and Notifications	Email, SNMP traps
Power Management	Remote power on/off/reset, Power monitoring
Firmware Updates	Remote firmware updates via web interface or command line