Dell IDRAC6 User Manual

246 Using the RACADM Command Line Interface
Using local RACADM Commands
You run RACADM commands locally (on the managed server) from a
command prompt or shell prompt.
setniccfg
sshpkauth
sslcertdownload
sslcertupload
sslcertview
sslcsrgen (can only
generate, not
download)
sslkeyupload
testemail
testtrap
traceroute
traceroute6
usercertupload
usercertview
version
vmdisconnect
vmkey
= Supported; =Not supported
Table 15-2. RACADM Subcommand Interface Support (continued)
Subcommand Telnet/SSH Local RACADM Remote RACADM

Dell IDRAC6 Specifications

General

Remote Management	Yes
Out-of-band Management	Yes
Remote KVM	Yes
Virtual Console	Yes
Version	6
Interface	Web-based
Features	Remote console, Virtual media
Security	SSL encryption
Protocols Supported	IPMI, SNMP
Authentication	Active Directory
Compatible Hardware	Dell PowerEdge servers (11th generation)
Remote Access	Yes
Alerts and Notifications	Email, SNMP traps
Power Management	Remote power on/off/reset, Power monitoring
Firmware Updates	Remote firmware updates via web interface or command line