Dell IDRAC6 User Manual

RACADM Subcommand Overview 347
Synopsis
racadm getractime [-d]
Description
With no options, the getractime subcommand displays the time in a
common readable format.
With the -d option, getractime displays the time in the format,
yyyymmddhhmmss.mmmmmms , which is the same format returned by the
UNIX
®
date command.
Output
The getractime subcommand displays the output on one line.
Sample Output
racadm getractime
Thu Dec 8 20:15:26 2005
racadm getractime -d
20071208201542.000000
Supported Interfaces
•Local RACADM
• Remote RACADM
• telnet/ssh RACADM
setniccfg
Table A-11 describes the setniccfg subcommand.
Table A-11. setniccfg
Subcommand Definition
setniccfg Sets the IP configuration for the controller.

Dell IDRAC6 Specifications

General

Remote Management	Yes
Out-of-band Management	Yes
Remote KVM	Yes
Virtual Console	Yes
Version	6
Interface	Web-based
Features	Remote console, Virtual media
Security	SSL encryption
Protocols Supported	IPMI, SNMP
Authentication	Active Directory
Compatible Hardware	Dell PowerEdge servers (11th generation)
Remote Access	Yes
Alerts and Notifications	Email, SNMP traps
Power Management	Remote power on/off/reset, Power monitoring
Firmware Updates	Remote firmware updates via web interface or command line