Dell IDRAC6 User Manual

iDRAC6 Enterprise Property Database Group and Object Definitions 383
iDRAC6 Enterprise Property
Database Group and Object
Definitions
iDRAC6 property database contains the configuration information for
iDRAC6. Data is organized by associated object, and objects are organized by
object group. The IDs for the groups and objects that the property database
supports are listed in this section.
Use the group and object IDs with the RACADM utility to configure
iDRAC6. The following sections describe each object and indicate whether
the object is readable, writable, or both.
All string values are limited to displayable ASCII characters, except where
otherwise noted.
CAUTION: Some groups and objects described in this chapter are not available
with OpenManage™ version 6.1 release. Support will be added for the
OpenManage version 6.2 release.
Displayable Characters
Displayable characters include the following set:
abcdefghijklmnopqrstuvwxwz
ABCDEFGHIJKLMNOPQRSTUVWXYZ
0123456789~`!@#$%^&*()_+-={}[]|\:";'<>,.?/

Dell IDRAC6 Specifications

General

Remote Management	Yes
Out-of-band Management	Yes
Remote KVM	Yes
Virtual Console	Yes
Version	6
Interface	Web-based
Features	Remote console, Virtual media
Security	SSL encryption
Protocols Supported	IPMI, SNMP
Authentication	Active Directory
Compatible Hardware	Dell PowerEdge servers (11th generation)
Remote Access	Yes
Alerts and Notifications	Email, SNMP traps
Power Management	Remote power on/off/reset, Power monitoring
Firmware Updates	Remote firmware updates via web interface or command line