GE DRAFT VOLUSON™ P8 / VOLUSON™ P6
DIRECTION 5723243, R
EVISION 6 DRAFT (MAY 23, 2018) BASIC SERVICE MANUAL
Chapter 5 - Components and Functions (Theory) 5-75
5-17-6 Advanced Functions Menu
1.) If system functionality allows it, collect vital system information as described in Section 5-17-8 "After
Recovering or Initializing the Hard disk" on page 5-80.
2.) Enter Linux as described in Section 5-17-2 "Access/Security" on page 5-61.
3.) In the “Voluson Maintenance System” main menu (Figure 5-35) select [Advanced].
The “Advanced Functions Menu” with following functions appear:
5-17-6-1 Exit
Return to the “Voluson Maintenance System” main menu.
5-17-6-2 Network
This item provides an easy interface for network setup.
The [Network] function is not intended for use in the field.
5-17-6-3 SSHD
By selecting this item, a SSH-daemon is started on the system.
The [SSHD] function is reserved for extended troubleshooting. Not intended for use in the field.
5-17-6-4 Restore C : from recovery partition(R:)
This image stored on the Rescue (R:) partition is used to replace the existing image of the
“C” partition.
NOTE: Data on the D: [User] partition (e.g., Patient Archive images, Measurement results, Patient Data and
Reports) will NOT be modified!
NOTE: “Permanent key” is required!( Utilities - System Setup - Administration - Option tab)
Figure 5-51 Advanced Functions Menu
The [Restore] function should only be performed if NO System DVD is available!
If you have a System DVD, please select the [Restore] function that is available in the
CD-ROM Functions Menu; see:Section 5-17-5 on page 5-65
To Next Page
Loading...
Need help?
General
