INFORMATION
B2050, B2350, B2650, B3150, WSM
I-7
3. SPECIFICATIONS
[ROPS and CAB HST Type]
Model B2350 B2650 B3150
PTO power *1 12.5 kW (17.0 PS) 14.6 kW (19.9 PS) 17.4 kW (23.6 PS)
Engine
Maker KUBOTA
Model D1105 D1305 V1505
Type Indirect Injection. Vertical, water-cooled,4cycle diesel
Number of cylinders 3 4
Bore and stroke
78 × 78.4 mm
(3.07 × 3.08 in.)
78 × 88 mm
(3.07 × 3.46 in.)
78 × 78.4 mm
(3.07 × 3.08 in.)
Total displacement 1123 cm
3
(68.53 cu.in.) 1261 cm
3
(76.95 cu.in.) 1498 cm
3
(91.41 cu.in.)
Engine gross power *1 15.9 kW (21.6 PS) 18.5 kW (25.2 PS) 21.8 kW (29.6 PS)
Rated revolution 2500 min
-1
(rpm)
Maximum torque
71.3 N·m
(7.27 kgf·m, 52.6 lbf·ft)
84.0 N·m
(8.57 kgf·m, 62.0 lbf·ft)
97.9 N·m
(9.98 kgf·m, 72.2 lbf·ft)
Battery 12 V, RC : 80 min, CCA (SAE) : 430 A, CCA (EN) : 360 A
Fuel
Diesel fuel No.2 [above î›10 °C (14 °F)],
Diesel fuel No.1 [below î›10 °C (14 °F)]
Capacities
Fuel tank 27 L (7.1 U.S.gals, 5.9 Imp.gals)
Engine crankcase (with filter)
3.1 L
(3.3 U.S.qts, 2.7 Imp.qts)
4.0 L (4.2 U.S.qts, 3.5 Imp.qts)
Engine coolant 4.6 L (4.9 U.S.qts, 4.0 Imp.qts)
Transmission case 17.0 L (4.49 U.S.gals, 3.74 Imp.gals)
Dimensions
Overall length
(with 3P)
ROPS 2730 mm (107.5 in.) 2937 mm (115.6 in.)
CAB 2887 mm (113.7 in.) 3007 mm (118.4 in.)
Overall width (min. tread) 1249 mm (49.17 in.) 1365 mm (53.74 in.)
Overall height
Rear ROPS 2353 mm (92.64 in.) 2327 mm (91.61 in.)
CAB 2112 mm (83.15 in.) 2140 mm (84.25 in.)
Wheel base
ROPS 1500 mm (59.06 in.) 1666 mm (65.59 in.)
CAB 1560 mm (61.42 in.) 1666 mm (65.59 in.)
Minimum ground clearance 290 mm (11.4 in.) 318 mm (12.5 in.)
Tread
Front 830 mm (32.7 in.) 936 mm (36.8 in.)
Rear 1006 mm (39.61 in.) 1050 mm (41.34 in.)
Weight
Rear ROPS 839 to 865 kg (1850 to 1900 lbs)
908 to 934 kg
(2010 to 2050 lbs)
CAB 1082 to 1108 kg (2386 to 2442 lbs)
1124 to 1150 kg
(2478 to 2535 lbs)
Clutch N/A
Traveling
system
Tires
Front 6.00-12 180/85D12
Rear 9.5-18 12.4-16
Steering hydraulic power steering
Transmission Main-hydrostatic transmission, 3 range gear shift
Brake Wet disk type
Minimum turning radius (with
brake)
2.1 m (6.9 feet)
Hydraulic unit
Hydraulic control system Position Control
Pump capacity 3P : 18.9 L/min (4.99 gals/min), Power steering : 14.2 L/min (3.75 gals/min)
3-point hitch SAE Category 1
Max. lift force
At lift points 970 kg (2138 lbs)
600 mm
behind lift
point
760 kg (1676 lbs)
Remote hydraulic control 2 Standard
Remote control valve coupler Hose connection type outlet
PTO
Rear-PTO SAE 1-3/8, 6 splines
PTO / Engine
speed
540 min
-1
(rpm) / 2400 min
-1
(rpm)
Mid-PTO USA No.5 (KUBOTA 10-tooth) involute spline
PTO / Engine
speed
2500 min
-1
(rpm) / 2500 min
-1
(rpm)
To Next Page
Loading...
Need help?
General
