TRANSMISSION
B2050, B2350, B2650, B3150, WSM
3-S1
1. TROUBLESHOOTING
HYDROSTATIC TRANSMISSION
Symptom Probable Cause and Checking Procedure Solution
Reference
Page
System Will Not
Operate in Either
Direction
1. Oil level is low Check oil level or fill
oil to proper level
3-S15
2. Speed control pedal linkage damaged Repair linkage 3-M23
3. Charge pressure is too low Solution order
1. Replace oil filter
cartridge
G-30,
G-35
2. Check charge
pressure
3-S10
3. Inspect or flush
charge relief valve
3-S43
4. Check and high pressure relief valve does not
move smoothly
Inspect or replace
check and high
pressure relief valve
3-S37
5. Neutral valve damaged Inspect or replace
neutral valve
3-S39
6. Component parts damaged Replace hydrostatic
transmission
assembly
3-S29
Vibration and Noise 1. Oil level is too low Check oil level or fill
oil to proper level
3-S15
2. Speed control pedal linkage damaged Repair linkage 3-M23
3. Charge pressure is too low Solution order
1. Replace oil filter
cartridge
G-30,
G-35
2. Check charge
pressure
3-S10
3. Inspect or flush
charge relief valve
3-S43
4. Check and high pressure relief valve does not
move smoothly
Inspect or replace
check and high
pressure relief valve
3-S37
5. Neutral valve damaged Inspect or replace
neutral valve
3-S39
6. Component part is damaged Replace hydrostatic
transmission
assembly
3-S29