Kubota WSM B2050 User Manual

GENERAL
B2050, B2350, B2650, B3150, WSM
G-56
9. TIRES
[1] TIRE PRESSURE
WARNING
To avoid personal injury or death:
• Do not attempt to mount a tire on a rim. This should be done by a qualified person with the proper
equipment.
• Always maintain the correct tire pressure. Do not inflate tires above the recommended pressure shown
in the operator's manual.
IMPORTANT
• Do not use tires other than those approved by KUBOTA.
Though the tire pressure is factory-set to the prescribed level, it naturally drops slowly in the course of time. Thus,
check it everyday and inflate as necessary.
[B2050, B2350, B2650]
[B3150]
NOTE
• Maintain the maximum recommended pressure in the front tires, when using a front loader or when
equipped with a full load of front weights.
 Dual Tires
Dual tires are not approved.
9Y1210982GEG0084US0
Tire sizes Inflation Pressure
Rear
8-16, 4PR 160 kPa (1.6 kgf/cm
2
, 23 psi)
9.5-16, 4PR 140 kPa (1.4 kgf/cm
2
, 20 psi)
9.5-18, 4PR 140 kPa (1.4 kgf/cm
2
, 20 psi)
315/75D-15, 4PR 100 kPa (1.0 kgf/cm
2
, 14 psi)
31 x 13.5-15, 4PR 140 kPa (1.4 kgf/cm
2
, 20 psi)
Front
6-12B, 4PR 200 kPa (2.0 kgf/cm
2
, 28 psi)
6-12, 4PR 200 kPa (2.0 kgf/cm
2
, 28 psi)
6.00-12, 4PR 180 kPa (1.8 kgf/cm
2
, 26 psi)
24 x 8.50-12, 4PR 160 kPa (1.6 kgf/cm
2
, 23 psi)
22 x 8.50-12, 4PR 160 kPa (1.6 kgf/cm
2
, 23 psi)
Tire sizes Inflation Pressure
Rear
12.4-16, 4PR 120 kPa (1.2 kgf/cm
2
, 17 psi)
13.6-16, 4PR 100 kPa (1.0 kgf/cm
2
, 14 psi)
Front
180/85D12, 4PR 160 kPa (1.6 kgf/cm
2
, 23 psi)
24 x 8.50-12, 4PR 160 kPa (1.6 kgf/cm
2
, 23 psi)
KiSC issued 03, 2014 A

Kubota WSM B2050 Specifications

General

Brand	Kubota
Model	WSM B2050
Category	Tractor
Language	English