Kubota WSM B2050 User Manual

HYDRAULIC SYSTEM
B2050, B2350, B2650, B3150, WSM
8-M5
3. THREE POINTS HYDRAULIC SYSTEM
[1] HYDRAULIC CIRCUIT
(1) Manual Transmission Model (Without Front Loader Valve)
Two hydraulic pumps (4), (6) are installed in this
series tractors.
Hydraulic oil is forced from hydraulic pump (5) to the
hydraulic outlet (6), relief valve (7), rear outlet (8) and
position control valve (11).
Three point hydraulic oil pressure is controlled by the
relief valve (7).
9Y1210982HYM0005US0
(2) HST Model (With Front Loader Control Valve)
Two hydraulic pumps (5), (7) are installed in this
series of machines.
Hydraulic oil is forced from hydraulic pump (7) to the
loader control valve (8), relief valve (9), hydraulic outlet
(10) and position control valve (11).
Three point hydraulic oil pressure is controlled by the
relief valve (9).
9Y1210982HYM0006US0
(1) Power Steering Controller
(2) Bi-speed Turn Valve and
Clutch (If Equipped)
(3) Hydraulic Pump
(for Power Steering and
Bi-speed Turn)
(4) Oil Filter Cartridge
(5) Hydraulic Pump
(for 3-Points Hitch)
(6) Hydraulic Outlet
(7) Relief Valve
(8) Rear Outlet
(9) Remote Control Valve
(10) Hydraulic Outlet
(11) Position Control Valve
(12) Lowering Speed Adjusting
Valve
(13) Hydraulic Cylinder
(1) Power Steering Controller
(2) Bi-speed Turn Valve and
Clutch
(3) Independent PTO
(4) HST
(5) Hydraulic Pump (for Power
Steering, Bi-speed Turn,
Independent PTO and HST)
(6) Oil Filter Cartridge
(7) Hydraulic Pump (for 3-Points
Hitch)
(8) Front Loader Control Valve
(9) Relief Valve
(10) Hydraulic Outlet
(11) Position Control Valve
(12) Lowering Speed Adjusting
Valve
(13) Hydraulic Cylinder
KiSC issued 03, 2014 A

Kubota WSM B2050 Specifications

General

Brand	Kubota
Model	WSM B2050
Category	Tractor
Language	English