Kubota WSM B2050 User Manual

ELECTRICAL SYSTEM
B2050, B2350, B2650, B3150, WSM
9-S30
(7) Work Light Switch (CABIN Model Only)
Work Light Switch
1. Remove the meter panel lower cover and disconnect the 6P
connector from work light switch (1).
2. Remove the work light switch (1).
3. Perform the following check.
9Y1210982ELS0058US0
1) Connector Voltage
1. Turn the key switch "ON" position.
2. Measure the voltage with a voltmeter across the terminals
shown in the table below.
3. If the reference value as shown in the table below is not
indicated, check the relating electric circuit.
9Y1210982ELS0059US0
2) Switch Continuity
1. Check the continuity across the terminals shown in the table
below.
2. If the continuity specified below is not indicated, the switch is
damaged.
9Y1210982ELS0060US0
(1) Work Light Switch
Voltage
Key switch at
"ON"
Terminal 5 –
Chassis
Approx. battery
voltage
Key switch and
head light switch
at "ON"
Terminal 2 –
Chassis
Approx. battery
voltage
(1) Connector (Harness Side)
(1) Connector (Switch Side)
(2) Night Light
(3) Indicator
(4) Work Light Switch
(5) Work Light
KiSC issued 03, 2014 A

Kubota WSM B2050 Specifications

General

Brand	Kubota
Model	WSM B2050
Category	Tractor
Language	English