3-26
Operation
The System gives you three chances to
enter an acceptable password before it
returns you to the Main Menu.
If the System accepts your password,
it displays the Control, Test or
Walktest menu (discussed later in this
chapter).
Addresses
All modules and devices annunciated on
the MXL are identified by an address
(MMM-DDD). Each address is in two
parts: a module address (MMM) and a
device address (DDD). The number
identifying the module may be as high as
253, and the number identifying the
device may be as high as 254. Always
enter all leading zeros for module and
device addresses.
Entering a Module Number and Device
Number
The System asks you to supply a
module number or device number,
or both, during certain functions
described in the pages that follow. The
terms module number and module
address are used interchangeably in
this manual. (Refer to the Device
Addresses By Module Type table.)
Entering a Module Number
When the System displays the following:
Type In Module Number:
Type all three digits (MMM), including
leading zeros, and press ENTER.
(When you type the module number,
use the Left arrow key as a backspace
key to erase errors.)
DEVICE ADDRESSES BY MODULE TYPE
Module
Type
Device Type
Device
Address
(Range)
MMB-1/-2
Common Alarm Relay 001
Common Trouble Relay 002
Supervisory or User
Programmable Relay
003
NAC 1 004
NAC 2 005
Pseudo Points 006-250
CSM-4
Circuit 1 001
Circuit 2 002
LED 1 005
LED 2 006
CRM-4
Relay 1 001
Relay 2 002
Relay 3 003
Relay 4 004
LED 1 005
LED 2 006
CZM-4
Zone 1 001
Zone 2 002
Zone 3 003
Zone 4 004
LED 1 005
LED 2 006
ALD-2I
Loop 1 Devices 001-060
Loop 2 Devices 001-060
XLD-1
Loop 1 Devices 001-030
Loop 2 Devices 001-030
Loop 3 Devices 001-030
Loop 4 Devices 001-030
PSR-1
Any Trouble Relay 001
Any Alarm Relay 002
Tamper 003
AC Transfer Logic 004
Disable +5V Relay 005
Disable Battery Charger 006
MOI-7
MOD-16 or MID/16 #1 001-016
thru thru
MOD-16 or MID-16 #8 113-128
VPM-5 #1 129-138
thru thru
VPM-5 #12 239-248
ACM-1 VSM-1 or VLM-1 or VFM-1
001-008
thru
241-248
OCC-1
ASC-1 or ASC-2 or ZAC-30 or
ZC1-8B or ZC2-4AB or ZC2-8B
or ZC3-4AB or ZCT-8B
001-008
thru
081-088
PSEUDO Pseudo Point 001-254
Technical Manuals Online! - http://www.tech-man.com