1-17
Description
CZM-1B6 Remote Conventional Zone
Module
The CZM-1B6 is an MXL intelligent
device that connects a single zone of
conventional devices to an analog loop.
The CZM-1B6 can power up to 15
compatible two-wire, ionization or
photoelectric smoke detectors. It can
also monitor an unlimited number of
shorting devices such as waterflow
switches, thermal detectors, manual
stations, etc.
Each CZM-1B6 can be assigned a
32-character custom alphanumeric
message. It also includes an alarm
indicator LED which is visible through
the cover plate.
The CZM-1B6 supports Style D (Class
A) and Style B (Class B) wiring. The
module uses one address on the
analog circuit.
PIM-1 Peripheral Interface Module
The PIM-1 module is an interface for an
MXL/MXLV System to remote periph-
eral devices such as printers, VDTs, and
CRTs. It connects an RS-232C device or
CRT to an MXL/MXLV System without
the peripheral devices protective
ground causing a ground fault. The
interface operates at up to 9600 baud
without losing any characters.
Mounting the PIM-1 in the MME-3 in
the upper right-hand corner provides an
isolated RS-232C port for an RS-232C
printer when used with an MXL/MXLV
System. The PIM-1 bidirectional inter-
face supports a supervised or non-
supervised printer, a CRT, or a VDT. Do
not use a non-supervised printer for an
NFPA 72 Proprietary or UL 1076 sys-
tem. For NFPA 72 Local, any EDP UL
listed equipment may be used.
CZM-1B6 Remote Conventional Zone Module
PIM-1 Peripheral Interface Module
Technical Manuals Online! - http://www.tech-man.com
To Next Page
Loading...
Need help?
General
