3-52
Operation
Press NEXT to display the DC
output voltage:
007: DC Output = 26.5 Volts
Press NEXT to display the AC
voltage:
007: AC Voltage = 120.1 Volts
Press NEXT again to exit the Voltage
submenu.
Test: Power - Remote - Current
Select Current. The System shows
the battery charging current in amps:
007: Batt Chg Cur = 0.0 Amps
Press NEXT to display the DC
output current:
007: DC Output Cur = 0.1 Amps
Press NEXT again to exit the Current
submenu.
Test: Power - Remote - Options
Select Options. The System shows
the first option field, transformer size:
007: Transformer Size = 6 Amps
Press Next to display the next
option field, maximum battery charge:
007: Max Batt Chg = 3.0 Amps
Press NEXT to display the next
option field, tamper switch:
007: Tamper Enabled
Press NEXT again to exit the Options
submenu.
To print the PSR-1 voltages, currents,
and options, press the PRINT key
when the when the R in Remote is
blinking. The System will print informa-
tion in a format similar to the following:
Power Supply Statistics for PSR-1 7
at 10:49:37 Feb. 25, 20xx:
Batt Voltage < 27.2 volts Batt Chg Cur = 0.0 amps
DC Output = 26.5 volts DC Output Cur = 0.1 amps
Gnd Fault Reference = 11.4 volts
AC Voltage = 120.1 volts
Options selected: Transformer size = 6 amps
Max Batt Chg = 2.0 amps
Tamper Disabled
Test: MKB1_Lamptest
Use Test MKB1_Lamptest to test the
LEDs and the alphanumeric display on
the MKB.
Select MKB1_Lamptest and press
ENTER. The System displays the
following menu:
Lamp Test: LEDs Display
Test: MKB1_Lamptest - LEDs
Select LEDs and press ENTER to test
the LEDs and the audible on the MKB.
The LEDs light for 5 seconds and then
return to their previous state.
Test: MKB1_Lamptest - Display
Select Display and press ENTER to test
the alphanumeric display. The System
tests the display and then returns to the
MKB1_Lamptest menu.
Technical Manuals Online! - http://www.tech-man.com
To Next Page
Loading...
Need help?
General
