Siemens SINUMERIK 828D User Manual

Programming technology functions (cycles)
9.3 Contour turning
Turning
416 Operating Manual, 01/2015, 6FC5398-8CP40-5BA2
Input simple
For simple machining operations, you have the option to reduce the wide variety of
parameters to the most important parameters using the "Input" selection field. In this "Input
simple" mode, the hidden parameters are allocated a fixed value that cannot be adjusted.
Machine manufacturer
Various defined values can be pre
-assigned using setting data.
Please refer to the machine manufacturer's specifications.
If the workpiece programming requires it, you can display and change all of the parameters
using "Input complete".
Machining type
You can freely select the machining type (roughing, finishing or complete machining).
For more detailed information, please refer to section "Stock removal".
Procedure
1.
The part program or ShopTurn program to be processed has been cr
e-
ated and you are in the editor.
2.
Press the "Contour turning" softkey.
3.
Press the "Grooving" softkey.
T
he "Grooving" input window opens.
G code program parameters
ShopTurn program parameters
Input
• Complete
PRG
Name of the program to be generated
T
Tool name
PL Machining plane D Cutting edge number
RP Retraction plane – (only for
machining direction, longi-
tudinal, inner)
mm F Feedrate mm/rev
SC Safety clearance mm S / V
Spindle speed or constant cutting
rate
rpm
m/min
F
Feedrate
*
Residual
material
With subsequent residual material removal
• Yes
• No
CONR Name to save the updated unmachined-part
contour for residual material removal - (only
"Yes" for residual material removal)

Siemens SINUMERIK 828D Specifications

General

Brand	Siemens
Model	SINUMERIK 828D
Category	Control Systems
Language	English