Technicolor TG670 User Manual

SNMP COMMANDS
1002
E-DOC-CTC-20100729-0006 v3.0.Copyright 2011Technicolor. All rights reserved.
This document contains Technicolor proprietary and confidential information. Passing on and copying of this document, use,
extraction and communication of its contents, is not permitted without written authorization from Technicolor.
snmp securitytogroup modify
Modify user to an access control group.
SYNTAX:
snmp securitytogroup modify securitymodel = <{snmpv1|snmpv2c|usm}>
securityname = <{ROCommunity|RWCommunity|SU|
user|LanAdmin|WanAdmin|PowerUser|TechAdmin|
Administrator}>
[groupname = <{SU_Group|V1ROGroup|V1RWGroup|
Basic_Group|Extended_Group|WanAdmin_Group}>]
[storage = <{other|volatile|nonVolatile|
permanent|readOnly}>]
where:
securitymodel Configure the security model. REQUIRED
securityname Configure the name of the user. REQUIRED
groupname Configure the name of an access group to which the user is
assigned.
OPTIONAL
storage Configure the storage type. OPTIONAL
nickdj.co.uk

Technicolor TG670 Specifications

General

Brand	Technicolor
Model	TG670
Category	Network Router
Language	English