VOICE COMMANDS
E-DOC-CTC-20100729-0006 v3.0.Copyright 2011Technicolor. All rights reserved.
This document contains Technicolor proprietary and confidential information. Passing on and copying of this document, use,
extraction and communication of its contents, is not permitted without written authorization from Technicolor.
1165
voice fax config
Configure the fax parameters
SYNTAX:
voice fax config [detect_timeout = <number{0-120}>]
[early-detect-faxmodem = <{enabled|disabled}>]
[transport = <{inband_auto|inband_reneg|
strict-inband-reneg|t38}>]
[udptl_redun = <number{0-3}>]
[VBDcodec = <{G711A|G711U|G711A+U}>]
where:
detect_timeout The time-out in seconds used to detect FAX(0 is no time-
out)
OPTIONAL
early-detect-faxmodem Detect fax or modem early OPTIONAL
transport The type of fax transport OPTIONAL
udptl_redun The number of secondary IFP packets OPTIONAL
VBDcodec VBDcodec to use during fax re-invite OPTIONAL
To Next Page
Loading...
Need help?
General
