ETH COMMANDS
470
E-DOC-CTC-20100729-0006 v3.0.Copyright 2011Technicolor. All rights reserved.
This document contains Technicolor proprietary and confidential information. Passing on and copying of this document, use,
extraction and communication of its contents, is not permitted without written authorization from Technicolor.
eth switch qos ifconfig
Configure per port qos parameters.
SYNTAX:
eth switch qos ifconfig port = <number{1-5}>
mode = <[+/-]flag[+/-flag...]{802.1p high
diffserv tos}>
[flowcontrol = <{disabled|enabled}>]
where:
port The port. REQUIRED
mode Classifier. REQUIRED
flowcontrol Enable/disable flow-control. OPTIONAL
To Next Page
Loading...
Need help?
General
