ROUTER COMMANDS
858
E-DOC-CTC-20100729-0006 v3.0.Copyright 2011Technicolor. All rights reserved.
This document contains Technicolor proprietary and confidential information. Passing on and copying of this document, use,
extraction and communication of its contents, is not permitted without written authorization from Technicolor.
router bgp peer clear
Resets the specified BGP peering session(s). If no options are given all
SYNTAX:
router bgp peer clear [peer = <ip-address in dotted format>]
[routerefresh = <{disabled|enabled}>]
where:
peer The IP address of the BGP peer. OPTIONAL
routerefresh Specifies to send a Route Refresh Message, only relevant if
this CAP is negotiated
OPTIONAL
To Next Page
Loading...
Need help?
General
