IPQOS COMMANDS
602
E-DOC-CTC-20100729-0006 v3.0.Copyright 2011Technicolor. All rights reserved.
This document contains Technicolor proprietary and confidential information. Passing on and copying of this document, use,
extraction and communication of its contents, is not permitted without written authorization from Technicolor.
ipqos ef config
Modify an IP QoS EF timer configuration for an interface.
SYNTAX:
ipqos ef config intf = <{loop|ipsec0|Internet|lan1|wan1|dmz1|
guest1}>
[state = <{disabled|enabled}>]
[timeout = <number{100-10000}>]
[mtu = <number{68-65535}>]
where:
intf The IP interface name. REQUIRED
state Enable, disable IP QoS EF timer for the interface. OPTIONAL
timeout The timeout in mili seconds. OPTIONAL
mtu The MTU of the IP interface in case of EF data. OPTIONAL
To Next Page
Loading...
Need help?
General
